question

eric-l977 avatar image
eric-l977 asked saadetswift16514 commented

Desktop App: Call log doesn't sync/update immediately

Is there any way to fix/speed up the delayed sync/update of the call log in the desktop app?  There have been a few times today where somebody called our office, and we needed to call them back shortly after hanging up.  Unfortunately, it takes several minutes for the call log in the app to update and display the phone number we need.
topic-default
1 comment
1 |1000

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

luke2909 avatar image luke2909 commented ·
Apologies TKO. When I made that comment I did not understand that we had just changed the app so that it actually saves the executable file in the SoftPhoneApp folder.

If this folder was deleted you will have to reinstall the app. The good news is that you no longer need admin privileges to install the RingCentral Phone app on your PC. So anyone should be able to install the app, even if your PC is managed by your employer.

To reinstall the app, follow the instructions on our Installing RingCentral for Desktop (Windows) page.

Ive updated the comment above so it shows that should only delete the SoftPhone folder.
0 Likes 0 ·
mike avatar image
mike answered
Sounds like it might be network related as the sync should be very quick. First try to clear the App Data folder on your PC. 

Go to Computer > Local Disk (C:) > Users > pick user > Appdata > Local > RingCentral >  Delete the two files

 


Then, log back in and re-test. 

Mike
1 |1000

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

eric-frankel5920 avatar image
eric-frankel5920 answered luke2909 commented
This is not what I currently see under C:/Users/MSI Eric/AppData/Local/RingCentral.  I see two folders (not files).  One is SoftPhone and the other is SoftPhoneApp.  Please advise if I should delete these folders or are there specific FILES that I need to delete in order for the Desktop App to stay in sync as I send or receive faxes.
1 comment
1 |1000

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

luke2909 avatar image luke2909 commented ·
You can delete the SoftPhone folder or everything inside of it. It only holds settings and other temporary information for the RingCentral for Desktop app. Once it is deleted you will have to log into your RingCentral account in the app again. Let us know if that helps out the lag on the call history. *edited to correct which folder to delete*
1 Like 1 ·
jfdurocher8801 avatar image
jfdurocher8801 answered saadetswift16514 commented
Hi,

Having the same issue and applied correction as per instructions.  Just that the issue re-appears the following day.

Can't patch the system every day. Any other suggestions
6 comments
1 |1000

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

saadetswift16514 avatar image saadetswift16514 commented ·
What version of the softphone are you on?
0 Likes 0 ·
jfdurocher8801 avatar image jfdurocher8801 commented ·
Sorry I dropped off the face of the earth...Couls'nt find this thread anymore...

Version 9.4.3
0 Likes 0 ·
saadetswift16514 avatar image saadetswift16514 commented ·
No worries! Hmmmm....I would suggest opening a case with us so we can get the debug logs and see what's going on!
0 Likes 0 ·
jfdurocher8801 avatar image jfdurocher8801 commented ·
Thank's

0 Likes 0 ·
jfdurocher8801 avatar image jfdurocher8801 commented ·
Any news? 
0 Likes 0 ·
Show more comments
jfdurocher8801 avatar image
jfdurocher8801 answered
Hello TKO,

Well don't feel bad, I did exactly the same as you and deleted the two "folders". Did this between calls because it seemed a quick fix. Ya, tell that to my customers...Lost 20 minutes to figure out what in h*** happened, re-installed the software, answer "welcome screen" and "Please fill out this information" (some field I couldn't fill, needed to write in Notepad, then copy & paste)

As for having the newest & best networking switches, routers and network, that's a check, check and check again. We are a software company with some great networking staff and I'm sitting at the support desk. If there are specific parameters, I haven't seen them anywhere.

And Yes, I''ve had this issue for years, just that now it seems to be getting worst and worst,  I especially hate it when you HAVE to call a client back: Can't redial, so I have to go through the contact list to find it.  It's just a fricking waste of time.

I'm pretty sure that this ticket will take forever to be acted upon and probably will never get a definite answer. Hey, at least these guy's are not charging us an arm and a leg. (My therapist says I have to keep positive)

Regards all, 
1 |1000

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.